I just got some adjustable lower control arms and I am wondering what is the best length to set them to for a jeep that has a 3" suspension lift. I want to make sure my pinion angle improves a bit.
Thanks for any advice in advance.
06-10-2009 01:12 AM
It's hard to say without seeing what your pinion angle is at now. My suggestion would be to set them to stock length and then run them out about 3 turns to start. Install, set on the ground under full weight and see what you think.
06-10-2009 07:02 PM
Who makes the arms? I would check there site and see if they have any install instructions for your lift height, and see what they say to set them too.
06-10-2009 07:52 PM
For what it's worth, my front LCA are at 16" exactly for a 2.5" OME lift with 3/4" front spacers. There are charts for this floating around the net.
06-10-2009 09:31 PM
Thanks guys for the feedback. I got a set of Teraflex arms.