Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   Internal slave to external slave ??? (http://www.wranglerforum.com/f290/internal-slave-to-external-slave-32446.html)

gmrwizard 06-23-2009 11:54 PM

Internal slave to external slave ???
 
I am about to change my leaking slave cylinder and clutch on my 92 YJ 4.0L. The slave cylinder is an internal. I have heard some say that it might be smart to swap the bell housing to an external setup. So the next time the slave goes bad, I donít need to drop the trans. What all do I need to accomplish this? How difficult of a job would this be? I would appreciate any feedback.
THANK YOU!

dooder 06-24-2009 06:04 PM

obviously you need bell housing and slave but will also need a clutch fork and maybe a later style throwout bearing. one thing to also look into is the clutch master if its a different piston size which will make a difference if so.


All times are GMT -5. The time now is 04:37 PM.