Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   1994 Sahara stock fog lights (http://www.wranglerforum.com/f290/1994-sahara-stock-fog-lights-32824.html)

pimp20g 07-03-2009 03:17 PM

1994 Sahara stock fog lights
 
I have a 94 wrangler sahara with the stock fog lights. My lights have seen better days. The buckets are rusted, one of the lens is cracked, and one of the stone guards is busted as well. I was wondering if any one knows of a place that sells replacement parts for them? Also does anyone make plug and play replacements or upgrades?

Thanks a lot guys

plac 10-24-2009 03:41 PM

I also am looking for oem replacement fogs for my 1993, which will plug right in to factory harness.

NAVYCHIEF 10-24-2009 04:21 PM

P/n 4728 646 is mopar. Cross that number

plac 10-24-2009 04:25 PM

Quote:

Originally Posted by NAVYCHIEF (Post 467851)
P/n 4728 646 is mopar. Cross that number

hmm.. thats just a $8 foglight bulb.

CJinPA 10-27-2009 12:24 PM

I would buy a set of aftermarket lights, cut the wires comming from you factory lights so you keep the factory plugs, and wire the new lights into the factory wiring.

plac 10-27-2009 01:50 PM

i didnt really want to hack up anything, but that would be the much cheaper way to go..

K.C.'sJeep 10-27-2009 01:59 PM

jeepsareus.com might have them.

plac 10-27-2009 02:08 PM

Quote:

Originally Posted by K.C.'sJeep (Post 470541)
jeepsareus.com might have them.

ya they have them for $95 a piece + shipping.. I'll have to compare an aftermarket price also.

unless anyone has a coupon code.......

CJinPA 10-27-2009 07:43 PM

Quote:

Originally Posted by plac (Post 470532)
i didnt really want to hack up anything, but that would be the much cheaper way to go..

You don't have to make it a hack job. You can make it look factory if you solder the wires, cover the connection with heat shrink and then put some wire loom over it.

plac 10-27-2009 08:42 PM

Quote:

Originally Posted by CJinPA (Post 470942)
You don't have to make it a hack job. You can make it look factory if you solder the wires, cover the connection with heat shrink and then put some wire loom over it.

thats true.. and i have all that stuff in my garage from previous projects..

but i dont want some ghetto no name plastic crap either.. i'll have to see what aftermarket has to offer.

i did find the dual oem foglight set on that same site for like $130... tempting.


All times are GMT -5. The time now is 09:13 AM.