Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   led tail lights (http://www.wranglerforum.com/f282/led-tail-lights-3302.html)

jeeperx2 10-06-2006 11:38 PM

led tail lights
 
I recently put in a pair of 4" round led tailights after which i discovered that leds take less amps to run so when i turn on the turn signal it flashes super fast which brings me to my question I need to install resisters but i dont know what size? to use. also do you wire them inline on just the stop/turn wire or stop/turn wire to ground wire like a lightbulb works?

save me from the fierce flasher!
thanks x2

TC_X 10-07-2006 12:30 PM

This write up might be able to help you ..

http://www.stu-offroad.com/electrical/led1/led-4.htm

MR.CLIFFORD 10-07-2006 04:13 PM

Quote:

Originally Posted by TC_X
This write up might be able to help you ..

http://www.stu-offroad.com/electrical/led1/led-4.htm



This is the process I used and worked out great :)

AGRESTI8 10-07-2006 08:12 PM

I just installed led's and cut the circuit. This site tells you how.
http://www.mesa4x4.com/tech_articles...r/flasher.html It worked great and if you mess it up you can always repalce it.

jeeperx2 10-17-2006 09:41 PM

thanks for the links i will give it a shot


All times are GMT -5. The time now is 12:26 PM.