Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   Trans idea (http://www.wranglerforum.com/f290/trans-idea-33201.html)

YjMopower 07-12-2009 05:34 PM

Trans idea
 
hey whats up guys so i finally got the sound away happened to be a sensor i think it was the crank position sensor ,so now i connected the trans the right way and still nothing got a couple of mechanics to take a look at it and they said the trans is bad.i already been thinking about some options i just wanted you guys help me make the best choice.
i was thinking changing from auto to manual * i already know that i need piot bushing , clutch , pressure plate ,the trans,clutch pedal and slave cyinder.iam not sure if the computer changes though,Any parts im missing? if i plan to do this swap which is the best trans to go with ?



or just get the same trans i have now.does anyone know the name of the 3speed 92 trans i have?

YjMopower 07-12-2009 06:15 PM

does anyone have the vacuum diagrams for the straight 6 4.0 with autotrans i want to know what are the two vacuum lines that i have to connect

jpdocdave 07-12-2009 07:21 PM

ax15 trans

there's more than two vacuum lines, can you be more specific

YjMopower 07-12-2009 09:19 PM

opps i meant the vacumm diagram for the auto trans there are two vacum lines that go up to the firewall, but thanks i figured it out allready. And the name of the trans is a TF999 - TorqueFlight .thats for the auto .I cant seem to find rebuild kits for this trans either.

jpdocdave 07-12-2009 09:29 PM

ax15 would be the manual to use for a swap from auto to manual.-

YjMopower 07-12-2009 09:37 PM

what parts will i be needing if i do this swap?do i have to change computer ecu?

jpdocdave 07-13-2009 07:15 AM

i think the computer won't matter, going to a manual.

YjMopower 07-13-2009 08:28 PM

opps

YjMopower 07-13-2009 09:38 PM

how can i tell from a AX-15 or Peugeot

jpdocdave 07-13-2009 09:45 PM

the ax 15 has a plate in the middle, and has two halves seperated front to back. the peugot is seperated in two halves from left side and right side.

dooder 07-14-2009 05:44 PM

too bad you dont live closer, ide come out one day and help you out in person.

YjMopower 07-14-2009 08:54 PM

yea that would been totally sweet hey doodler it happen to be the knock sensor making the noise. i am not sure what to do right now i was thinking of changing from auto to manual but i cant seem to find anyone selling ax15 around here i tried the tristate area already. and if i do find someone there selling it for 450 . a lil to much. I found a rebuild kit on quadratec for my auto http://www.quadratec.com/products/52023_13.htm the only problem is i wouldnt want to install it and still have the same problem.

dooder 07-15-2009 06:08 AM

have you checked craigslist? that would be my first place ide check. ide stick with auto trans since ide want to drive asap. with stick youde need more parts. get it driveable and then later when time/money are there convert it to stick.

YjMopower 07-15-2009 10:41 AM

yup thats where i been checking at couldnt find anything, i took my trans to a couple of places and they said they can do it for 400 , but my question is can i use the rebuild kit and a new tc will it work again?

dooder 07-15-2009 05:16 PM

Quote:

Originally Posted by YjMopower (Post 401832)
but my question is can i use the rebuild kit and a new tc will it work again?

i dont know. without seeing trans and tc in person i just dont know. from previous threads i believe you damaged the tc or pump but sometimes hands on is the only way to diagnose. the best i can do is give you some info but you need to post pics of trans input shaft looking straight in and tc where it splines onto input shaft.

generally speaking if the trans worked before it should work without a full rebuild. just replace the broken parts. if youve never rebuilt an auto trans ide say leave it to someone else. too many things need to be splined, sealed,clipped, and compressed perfectly or you might not have any gears at all.

YjMopower 07-17-2009 10:27 PM

okay i think the verdict is going to be to change to manual, i know i will need more parts but thats not to much of a problem besides i always wanted to learn manual . meanwhile iam going to keep the autotrans on the side and fix it up so i can use it for my future 360. I found a guy selling the trans and the other parts for $200 . Iam not sure about the clutch he is looking for it, most likey get this new with the kit. this ax15 is coming out of a 89 Comanche . so is the flywheel and pedals . my question is will the pedal work for the wrangler? from pictures i think it could work but not to sure. i think i might also need a different flywheel i looked at the flywheel on quadratec and this one seems to be missing teeth but yet again it came out of a Comanche cant be to sure.

YjMopower 07-17-2009 10:35 PM

http://photos-b.ak.fbcdn.net/hphotos..._6936921_n.jpghttp://photos-f.ak.fbcdn.net/hphotos..._3237544_n.jpghttp://photos-h.ak.fbcdn.net/hphotos..._5992912_n.jpghttp://photos-a.ak.fbcdn.net/hphotos..._6235460_n.jpghttp://photos-g.ak.fbcdn.net/hphotos..._5100307_n.jpg

YjMopower 07-17-2009 10:38 PM

Anyone see anything off?by the way will the output shaft change that connects to the tcase? does anyone know what wire harness is on there already on the pic?

YjMopower 07-17-2009 10:47 PM

yup the pedals are different but found the right one

YjMopower 07-18-2009 12:12 AM

am looking for a clutch kit yet it tells me the yr of89 commaches had the peoguot trans , do you guys know if this is the ax15 ? on what yr ranges can i get the clutch ?

RednekYJ 07-18-2009 09:21 AM

I'm not 100% sure but that looks like an AX-5 to me. Can you count the splines on the output shaft? If there are 21 that sucks. If 23 you are in good shape.

yjwes 07-18-2009 07:12 PM

Quote:

Originally Posted by YjMopower (Post 403344)
am looking for a clutch kit yet it tells me the yr of89 commaches had the peoguot trans , do you guys know if this is the ax15 ? on what yr ranges can i get the clutch ?

thats a ax-15 look up a clutch kit for a 90

YjMopower 07-18-2009 09:09 PM

okay found a clutch kit with the slave cylinder off ebay for $135.yr it ranges are 89-92 .now for the flywheel iam pretty sure i can use the one right above in the pics. now for my next question the clutch hose can i make the line out of stainless steel lines ?what would be the measurement? if the hose is fryed can i just replace that portion?or is it better to replace the whole thing?

yjwes 07-18-2009 11:35 PM

try to reuse that hose


All times are GMT -5. The time now is 01:55 AM.