Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Suspension question (http://www.wranglerforum.com/f210/suspension-question-33978.html)

jdhallissey 07-29-2009 01:35 PM

Suspension question
 
Do dana 44's require a shorter shock then the dana 35? The rear shock on the truck right now only has about 2in of the cylinder showing. That is causing my terrible ride. IF I hit any kind of bump it toss my all over the place. So I am going to have to get shorter shocks but has anybody else had this issue?

nvr-enough 07-29-2009 01:41 PM

sounds like you should have swapped in some rockwells.....

Jerry Bransford 07-29-2009 02:30 PM

Nope, the TJ D44 uses the same length shocks as the TJ D35c does. I swapped from a D35c to a D44 and all of those types of dimensions were the same. Only the D44's pinion shaft protrudes out further, everything else exterior-wise is identical. :)

jdhallissey 07-29-2009 02:41 PM

Jerry figured it out. The mounts on the axle are moved from the stock location to closer to the tire and then up. FML

2 fixes-
1- buy new shocks that are shorter
2- move the mounts back to the stock location.
I am beyond pissed right now.

yjwes 07-29-2009 04:10 PM

Quote:

Originally Posted by nvr-enough (Post 410683)
sounds like you should have swapped in some rockwells.....

x2


All times are GMT -5. The time now is 10:36 PM.