Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   How High Are You....Would you measure for me? (http://www.wranglerforum.com/f282/how-high-are-you-would-you-measure-for-me-36071.html)

njkeagle 09-07-2009 01:46 AM

How High Are You....Would you measure for me?
 
I forgot to take any measurement when I did my lift about 4 months ago and I would appreciate if you could take the time and measure from where the red dot is on my photo or at the door hinges line would work too . I have a RC 4" lift with TrXus 33's, no BL. I am at about 23 1/2 inches from the rocker guard to the ground. Now there is a small gap of a about an inch under the guard to the actual frame of the Jeep so that would make it 24 or so. The Jeep stock had 30's. I measured a stock with 30's and it was 18" from the same spot. I just want to see what people have. If you have RC even better.

Thanks

http://i498.photobucket.com/albums/r...Pocono03-1.jpg

TJ01 09-07-2009 06:31 AM

I took before and after measurements. They were taken from nearly the same spot as where your red dot in your photo is. I also have a 4" RC lift. I have Mickey Thompson Baja MTZ's. (33x12.50x15) My before measurement was 18 1/4 inches. My after measurement is 24 1/2 inches. This is measured from the ground to the bottom of the side of the jeep out at the edge.

Ironman 09-07-2009 11:58 AM

29" for me. 5.5" RE lift with a 1" body lift sitting on 37'S

njkeagle 09-07-2009 02:35 PM

Quote:

Originally Posted by TJ01 (Post 436799)
I took before and after measurements. They were taken from nearly the same spot as where your red dot in your photo is. I also have a 4" RC lift. I have Mickey Thompson Baja MTZ's. (33x12.50x15) My before measurement was 18 1/4 inches. My after measurement is 24 1/2 inches. This is measured from the ground to the bottom of the side of the jeep out at the edge.

Do you have rocker guards? Cause as I said there is a about"1 gap so if yo don't we are bout the same.

Thanks

TJ01 09-07-2009 06:28 PM

1 Attachment(s)
I do not have rocker guards, although I would like to get some. So, I would say our measurements are the same for the RC kit with 33x12.50x15's. Your jeep looks great!!! How do your rocker guards attach?

njkeagle 09-07-2009 08:08 PM

Quote:

Originally Posted by TJ01 (Post 437075)
I do not have rocker guards, although I would like to get some. So, I would say our measurements are the same for the RC kit with 33x12.50x15's. Your jeep looks great!!! How do your rocker guards attach?

Thanks man your's too. You basically drill holes on the side and they wrap under the body and they bolt there as well that's why there is that 1/2 gap cause it's not flat on the body knthe under side. Great protection saved my ass many times.

BLACKTOOTHGRIN 09-08-2009 12:51 AM

Quote:

Originally Posted by njkeagle (Post 436779)
How High Are You....

I'll let you know in a few minutes.....:blunt:

If I can remeber that long from now. :rofl:

njkeagle 09-08-2009 01:07 AM

Quote:

Originally Posted by BLACKTOOTHGRIN (Post 437315)
I'll let you know in a few minutes.....:blunt:

If I can remeber that long from now. :rofl:

:D And I was thinking to skip the"......would you measure?" part but then I thought I would get lots of :blunt:responses:D

Rawkon 09-08-2009 01:20 AM

4ft .... http://photos-a.ak.fbcdn.net/hphotos..._4599837_n.jpg :D

njkeagle 09-08-2009 01:24 AM

Quote:

Originally Posted by Rawkon (Post 437331)

Thats funny how did you do that consider the road?:D

njkeagle 09-08-2009 01:29 AM

I saw your video about the pic on your other post. Sweet!

Rawkon 09-08-2009 01:29 AM

lol ok give or take a couple inches.

wavebacktothetj 09-08-2009 01:05 PM

im at 24" from my rocker guards with a 4" procomp no BL or spacers


All times are GMT -5. The time now is 07:19 PM.