Jeep Wrangler Forum

Jeep Wrangler Forum (
-   YJ General Discussion Forum (
-   -   Bleeding External Slave Cylinder '95 wrangler (

dwagler 09-10-2009 07:44 AM

Bleeding External Slave Cylinder '95 wrangler
Is it possible to bleed the slave cylinder that activates the clutch on these ? I see a set screw on the cylinder, and wasn't sure what it was for. Clutch works fine for about 5 min., then it doesn't want to disengage any longer.

Is there a way to tell if the slave cylinder is bad ?

Hope someone can help.


andrew2456 09-10-2009 11:40 AM

The bleeder is on the trans. If it's a 4 banger it on the pass side and if a 6 its on the driver side. You need 2 people to do it. It looks like a little rod sticking out of a hole with a big nut and small bleeder sticking out of that.

All times are GMT -5. The time now is 06:23 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.