Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Point me in the right direction - side turn signal (http://www.wranglerforum.com/f210/point-me-in-the-right-direction-side-turn-signal-364858.html)

trebormesos 10-29-2013 11:02 AM

Point me in the right direction - side turn signal
 
Getting ready to cut my stock flares and I remember seeing some place on this TJ section someone found a turn signal housing that the stock bulb fits into. Maybe from tractor supply.

or if someone has found a real easy way to wire in a new LED and still get them to flash that would be cool to.

thanks for the help

Owen_TJ 10-29-2013 01:31 PM

I dont have side markers on mine but i used the stock signal from a wrecked JK which fits the stock tj bulb...just relocated them into my grill.

trebormesos 10-29-2013 01:42 PM

front ones are ok as is. it's the ones on the sides i'll to replace.

Hoping to not have to do a big mod for them

Water Dog 10-29-2013 02:04 PM

Quote:

Originally Posted by trebormesos (Post 5738186)
front ones are ok as is. it's the ones on the sides i'll to replace.

Hoping to not have to do a big mod for them

Just go to Radio Shack and get these parts:

4 Rectifier Diodes #IN4004
2 560 Ohm watt Resistors #271-1116
3 Colors 18 gauge wire
Solder
Heat shrink


then solder them up like the picture below and ground the negative wire of the led and you should be good to go. Just be sure and insulate the bare wires then place the whole thing in a piece of tubing or something else semi rigid.

This will allow the led to be the marker light plus blink when your turn signal is on

trebormesos 10-29-2013 02:19 PM

perfect.... thanks


All times are GMT -5. The time now is 06:34 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.