Jeep Wrangler Forum

Jeep Wrangler Forum (
-   YJ General Discussion Forum (
-   -   Side Mirrors (

COyj 09-21-2009 08:27 PM

Side Mirrors
Wondering if anyone else has had any problems with their side mirrors moving from where you put them. I know it might sounds strange, but it happens. Im guessing its due to closing the doors to "hard"... So I started looking into different side mirrors and I found the HighRock 4X4 03-06 Factory Styling Replacement Mirrors on Quadratec and from what I can tell they are nothing more then just the factory mirrors. My question is are they actually the same mirrors or is the bracket used to mount them different? Anyone currently running these mirrors by HighRock 4x4? If anyone knows anything about this topic can you explain? Pictures?


NAVYCHIEF 09-21-2009 09:56 PM

There is a way to tighten up the mirrors. Some one will come along and explain.:punk:

COyj 09-21-2009 10:20 PM

I hope so, its driving me absolutely insane.

NAVYCHIEF 09-21-2009 10:29 PM

look under the rubber boot. there may be a tightening nut there. i saw this addressed a while back on another thread.

COyj 09-21-2009 11:19 PM

Ok I'll take a look tomorrow and see what I can come up with.

Schmo 09-21-2009 11:52 PM

Little more info I found for ya . . .


Originally Posted by Mike Phifer (Post 403002)
The mirror attaches to that bracket arm with a ball and socket type joint. On the underside of the mirror, on either side of the rubber cover, you will see a phillips head screw. Tighten those down - it will compress the plate behind the ball and tighten the joint. Good idea to do the one next to the door first since you will need to cock the mirror out to get the right angle on the screw.

NAVYCHIEF 09-22-2009 02:08 AM

thanks schmo.:punk:

COyj 09-22-2009 11:18 AM

Took a look this morning at what you were saying Schmo only problem is the screws on the underside of the mirrors are tightened as much as physically possible... So does anyone know if factory 03-06 TJ side mirrors work on a YJ? Is the both pattern different?

Schmo 09-22-2009 12:15 PM

Just throwing this out there . . . no idea if this would work as I haven't gone down and looked at it . . . does it feel like the screws are in all the way and blocked on the back so they can't go any farther . . . if so, would removing the screws and placing a washer under help give you that extra bit of tension you need?

COyj 09-22-2009 06:46 PM

Ill probably need up just buying a set of TJ mirrors sometime in the near distant future... I cant take this anymore.

All times are GMT -5. The time now is 03:26 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.