hey guys how much of a spacer would i need to run a MT baja claw radial on my stock 06 wrangler x rims? i hav ebeen told i need a spacer so they wont rub inside but that they will fit my rims with no problem. also, who makes a decent spacer?
what size tire??? 31x10.50? if thats the size then you can fun it on the stock wheels but you may get a little rubbing on the control arms. you could probably go with a 1" spacer and spidertrax is the most popular BUT i wouldn't reccommend going with one at all. steel wheels are CHEAP and they look good.
by the way, yes they will mount on your wheels fine
I need to add a question to this thread=hijacked
(no need to start )another tire thread
I have the ECCO package P225/75R15 Wrangler tires
I saw two different set of tires P235/75R15 Michelin and BF
at Costco I would like to put on my Wrangler
'06 "X" trim 3.73 gears.
The Tech after putting the info in his computer said the only thing that was coming up was the standard P215 and P225.
I would have to go to the dealer to find out if I could put those
on.I'm not really up to taking a trip up there just to find out if I can upgrade......so I'm asking my fellow if it's okay to do so.
Or just get some "aggressive" looking P225's (other than the stock) and put them on my Jeep???? :confused:
|All times are GMT -5. The time now is 01:50 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.