Jeep Wrangler Forum

Jeep Wrangler Forum (
-   General Jeep Discussion (
-   -   How to Roll Up Synthetic Winch Line ? (

nicolas-eric 10-12-2009 04:24 PM

How to Roll Up Synthetic Winch Line ?
32 Attachment(s)

When I roll up my sythetic winch line I attach the hook on a tree and pull the Jeep to this tree with the winch while I pres the brake pedal. On that way I avoid that the winch line draws into the lower layers when I use the winch the next time with more load.

Some days ago I rear that I could roll the winch line up crosswise (each layer in a different direction) instead.

But how should that work?
Did you ever hear of that?


nicolas-eric 10-13-2009 10:35 AM

32 Attachment(s)

jdhallissey 10-13-2009 03:36 PM

The way you did it first is the way I have learned and the way I will keep doing it. It is simple you also don't do any work with method 1! (ya so what i am lazy :D)

nicolas-eric 10-13-2009 04:30 PM

32 Attachment(s)
The problem is my winch does 65 ft/min without load and a normal cable. With a synthetic line and some load itīs only about 50 ft/min fast. And I'm also lazy, I want it as fast as possible.

jdhallissey 10-13-2009 06:23 PM

Well then grab a cup of coffee and read the wrangler forum from your phone while the winch does it's work lol. I actually believe there is enough weight in a jeep to not hold the brakes just leave it in neutral.

All times are GMT -5. The time now is 11:42 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.