Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   take a look (http://www.wranglerforum.com/f282/take-a-look-38001.html)

adkjoe 10-14-2009 11:05 AM

take a look
 
On a stock TJ is there any rubber bushings between the frame and body? I can't tell if I have a 1" Body lift or not because I don't know what it should look like if it were stock. The first pic is the drivers side and the second is the rear drivers side above the rear bumper. Is that stock or a 1" BL?

http://img101.imageshack.us/img101/6503/sidep.jpg

http://img527.imageshack.us/img527/100/rearho.jpg

mudslinger150 10-14-2009 11:09 AM

those are standard body mounts (factory height)

mudslinger150 10-14-2009 11:10 AM

what you need to do is stack 3 hockey pucks together and slide them in there, all the way around, then your golden

adkjoe 10-14-2009 11:12 AM

I don't need a body lift I was just curious since I got it used and wasn't sure what it was supposed to look like stock. Thx homie

mudslinger150 10-14-2009 11:16 AM

I was pickin about the BL, that would give you a 4" BL! 2" is almost too much. So i installed that lift lastnight, 6pm - 2:30am! i am tired

adkjoe 10-14-2009 11:20 AM

I bet, nice work! I read your post sounds like all is well for the most part. Now you gotto take her for a test run, there is some awesome spots down by lincoln gap. I was lookin at the ORV maps to, I want to plan a trip to Maine and go wheelin for the weekend in all wheels off road park in Lewiston, you should join me. I took my cherokee there a couple years ago, it's bad A$$, I want to tackle it with the wrangler now though it would be a lot more fun.


All times are GMT -5. The time now is 06:23 PM.