Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   JKS 1.25 lift (http://www.wranglerforum.com/f210/jks-1-25-lift-38011.html)

tbk125 10-14-2009 01:22 PM

JKS 1.25 lift
 
im new to off roading, sounds like this is the body lift i want to put on my TJ just wondering if im going to need anything else to make everything run and shift properly besides the kit :zap:

jdhallissey 10-14-2009 01:45 PM

Nope. The BL is frowned on for the most part over 1.25". Your good at that level. I wouldn't go much higher. They tend to look ugly too since there will be a gap between the frame and the body. They do serve a purpose tho, to let you add tummy tucks and skid plates on the bottom of the rig.

snwchris 10-14-2009 02:58 PM

Most usually incorporate the BL along with a MML (Motor Mount Lift).
If doing the BL only, you'll have to adjust the fan shroud so the fan doesn't dig into it now that your raising the body up.

Chris

tbk125 10-14-2009 03:12 PM

thanks

nicolas-eric 10-14-2009 08:19 PM

Quote:

Originally Posted by snwchris (Post 459402)
Most usually incorporate the BL along with a MML (Motor Mount Lift).
If doing the BL only, you'll have to adjust the fan shroud so the fan doesn't dig into it now that your raising the body up.

Chris

x2

The MML is also good to avoid bad rear driveline angles when you install a suspension lift.


All times are GMT -5. The time now is 06:24 AM.