Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Front Drive Shaft CV Assembly (http://www.wranglerforum.com/f210/front-drive-shaft-cv-assembly-38334.html)

Redwings 10-20-2009 01:40 AM

Front Drive Shaft CV Assembly
 
4 Attachment(s)
I have removed the front drive shaft. What I found is the CV assembly is completely destroyed. Is there anything I can do? To me it seems that the ball centering kit that I would have purchased would have fixed the problem but the pin is damaged and so is everything associated. Will I need to buy a whole new shaft and if so where?

snwchris 10-20-2009 06:39 AM

Yea with the pin being damaged might be an issue. You should be able to bring it to a local driveshaft shop in the area to see if can be fixed & rebuilt.

Otherwise I would recommend getting a Front DS from either Coast Driveline, HAD (High Angle Driveline) or Tom Woods.

Chris

whitebuffalo 10-20-2009 08:51 AM

take it to a local driveline shop and they can put a new cv end on it.

jdhallissey 10-20-2009 11:01 AM

Mine did the same thing. It is whole new. Shaft time. Tom woods is 300 bucks. Worth it

Jerry Bransford 10-20-2009 12:25 PM

Any small local driveshaft shop can easily (!) and inexpensively rebuild that CV. Don't waste $$$ by buying a new DS.


All times are GMT -5. The time now is 06:04 PM.