Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   nuts and bolts (http://www.wranglerforum.com/f218/nuts-and-bolts-38376.html)

Macman 10-20-2009 07:11 PM

nuts and bolts
 
While taking pieces of my 87 jeep wrangler apart to sand and prime. I found there where bolts that I had to drill out because they where striped and or just not coming out from being rusted for so long.

Is there a place I can get replacement bolts? Thanks in advanced

NAVYCHIEF 10-20-2009 07:33 PM

either a dealer or hardware store. i assume(yeah i know) you are refering to the torx head bolts.

Macman 10-20-2009 07:57 PM

yea those would be the ones im talking bout thanks

morphious 10-20-2009 11:27 PM

screw um get standered bolts to replace

Macman 10-20-2009 11:29 PM

What do yu mean?

Dan Noecker 10-20-2009 11:59 PM

I use either the grade 5 or 8 bolts from the hardware store. It does not hurt to put a small amount of anti-sieze compound on the threads to aid in getting them apart should the need arise.

Macman 10-21-2009 12:02 AM

cool thanks

rebelBullDawg325 10-21-2009 11:51 PM

grade 8 and def use anti sieze...... if you need more than one or two bolts. it'll save you money to go somewhere like fastenall and buy em in "bulk" its probably a bag of 50, but will actually save you money

Macman 10-22-2009 12:50 AM

Tey are all dif types. Like one of this and 4 or that.

rebelBullDawg325 10-22-2009 09:58 PM

where are you in bama? i've got a few random extras from when i redid my entire

Macman 10-22-2009 10:36 PM

Low down in Mobile where are you?


All times are GMT -5. The time now is 06:46 AM.