I just bought my 87 wrangler and it was seatless other then the driver seat. i was wondering where the best place to get cheap seats would be. thanks
10-20-2009 07:59 PM
sunfire seats are bolt in afaik
10-20-2009 09:26 PM
Haha I'm in the lowest part of Alabama.
So do I need the seat brackets for the other seats or doe they just bolt in?
10-20-2009 09:31 PM
screw it get the full race seats u wont regret the buy
10-20-2009 09:32 PM
Have you tried Craig's list? It's loaded with Jeep parts up here!
10-20-2009 09:50 PM
Well I'm a poor college student and I just need a seat so I can have someone other then just me in the jeep haha
10-20-2009 09:59 PM
like i said full rase seats five point harness or nothing
10-20-2009 10:58 PM
those are like $400 each
10-21-2009 07:17 AM
check ebay u can get um cheaper then that but if ur doing it on the cheap then go get some sunfire seats
10-21-2009 08:33 PM
I just installed the driver's side in my YJ, it required extesive modifications to the (Rugged ridge) fold forward seat riser. It too was brand new, but i had to cut it apart & shorten the front links to lower the front of the seat. I also had to cut off the tabs & move the riser inboard to the rail holes.
The seat is sweet though, & will work with the stock seat belts.
Now i have to find time to put the passenger seat in.
I have no idea how to weld at all I need something that bolts right in or just a hole I need to drill. Those are some nice seats though. I bet they look good in your jeep.
10-21-2009 11:06 PM
thats weird i didn't get that prob mine bolt right in
10-21-2009 11:52 PM
The same seats?
10-22-2009 10:57 AM
u mean me and buckshot i dont know if we have the same seats
10-22-2009 11:42 AM
O ok I thought you looked at the link on buckshot's post.
10-23-2009 09:17 AM
no i didn't but no those are different from mine mine dont recline
10-23-2009 10:06 AM
What kind did you install?
10-23-2009 10:09 AM
i cheated mine came with them but they bolt into stock location but i dont know what brand they are never cared i guess
10-23-2009 10:56 AM
10-31-2009 08:42 PM
The seats in my link did bolt right to the stock risers, but they weren't positioned right.
The driver's seat was too far outboard, & both seats were high in the front much like you see when someone gets GM seats from the junkyard. My feet felt like they barely reached the pedals & I'm 6'-1" tall.