amc 304 coil problem
just plugged my ignition wires like it was before and the coil is comming really really hot, the engine will start and run though ???
on the 2 ignition module box :
the 4 wires plug has never been cut or anything so all the wires are going were it should, the green is going to the - stud on the coil
on the 2 wires plug the light blue is going to the ground and the red/white one to batterie pos side ?
i guess theres one of thiese 2 wires wich is not to its place
or could it be a bad coil ??
|All times are GMT -5. The time now is 08:01 AM.|