Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   window crank please help (http://www.wranglerforum.com/f210/window-crank-please-help-39148.html)

skupper2 11-02-2009 09:08 PM

window crank please help
 
can aneyone tell me how to remove the window crank handle from a 1997 tj

thank you

G-Pur 11-02-2009 09:37 PM

pull really hard. I don't think it's held on with anything other than plastic teeth against the grooved metal post. Mine came off when I first got it. Pushed it back on, and haven't had a problem since. It's been over a year.

jdub2k5 11-02-2009 09:52 PM

it should be held on by a c clip, most window cranks are done that way

edit: it does have a c clip please don't yank her out without removing that first

steelers151 11-02-2009 09:54 PM

I used a thin screw driver and popped the metal clip off.

mikes05unlimited 11-03-2009 12:47 AM

If you use a paint can key it comes right out. Also put the clip back on BEFORE you put the crank back on and just give it a whack with the side of your hand and it pops back on. A lot easier than trying to get it on while on your door.

s3nt3nc3d 11-03-2009 12:52 AM

They make a special tool to remove those clips if you don't have anything laying around that will pop em off...you can buy em for under $5 at most auto parts stores. Also be careful...those little clips are notorious for launching 30 feet in the air and never being seen again. lol

jdub2k5 11-03-2009 01:54 AM

http://img.auctiva.com/imgdata/6/1/7...04762016_o.gif

any of these will work

MR.CLIFFORD 11-03-2009 09:04 AM

Put the little clip back in the window crank handle before you install it. It will pop right on.


All times are GMT -5. The time now is 07:11 AM.