Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Pics Forum (http://www.wranglerforum.com/f362/)
-   -   pics 98 sahara (http://www.wranglerforum.com/f362/pics-98-sahara-40650.html)

koz555 12-01-2009 10:24 PM

pics 98 sahara
 
5 Attachment(s)
okay since I'm not able to or i can't seem to find the upload photos button on my profile page, I'm posting pics on this thread. I bought a 1998 Sahara about 2 months ago and I have a few issues with it. I know I have a 4 inch (BL) but I don't know what kind. The rear (CA) and the rear shock on the passenger side is broken. Can someone see what I have and explain it to me? I'm a newbie here and I would rather do things myself instead of taking my Jeep in. From the looks of my pics can I put some (ome) shocks in the rear that would fit, and what size? Also, how do I replace (CA)? Thanks, I would appreciate any info.

koz555 12-01-2009 10:28 PM

98 sahara pics continued
 
4 Attachment(s)
more pics

Bignuke 12-01-2009 10:38 PM

Good lookin' Jeep. I would suggest get rid of the BL and get a cheap suspension life (Rough Country) if your low on pay... If not, go better. I'm not flaming or anything, just a suggestion. Have the same model/year. :)

Adamlee78 12-01-2009 10:53 PM

I agree. Lose the BL!!!

koz555 12-01-2009 11:40 PM

i know that if i change or take off the bl that i would have to change some stuff around correct?? i got some grade 5's holding me up but i wana go up to grade 8's. how much work would that be?? and would i have to change any gears or linkage..etc. if i go down to 2in??? also what about some ome shocks? would they give me a smoother or straighter drive.. im kinda all over the road right now.thanks for any advice

distortedtj 12-02-2009 12:39 AM

1 Attachment(s)
Ok first, who told you that was a 4 inch body lift? They were high.

Looks to be a 2inch body lift and that is all. To tell for sure just measure the puck seen here....

distortedtj 12-02-2009 12:50 AM

1 Attachment(s)
Also you were questioning before about your rear axle.....

Top one is a D35 rubber FILL plug..bottom pic is a D44 metal FILL plug...

koz555 12-17-2009 02:18 PM

alright thanks guys figured it out.. lol i guess he was high cause he told me it was a 4in bl but it measured 2in.. thanks i find this forum very helpful

distortedtj 12-18-2009 12:19 AM

:D.


x


All times are GMT -5. The time now is 11:52 PM.