Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Tran help! (http://www.wranglerforum.com/f218/tran-help-413818.html)

Jeepwrangler1993 11-29-2013 11:23 PM

Tran help!
 
tranny is making a clicking noise when I down shift to 1235 gears it makes a loud clicking noise n wen u let off the gas expect 4 gear it sounds fine. What u guys think? Thank

jokerchief462 11-30-2013 12:48 PM

It may not be in the transmission.

Take a close look at everything driveline and look around and shae things if you have to.

Look at the exhaust and the heat shield above the CAT.

Once you are sure it is in the transmission before I got too excited I would drain the fluid and see what you get out of there. If it has never been changed since you have owned it now is a good time.

You have two choices when you re-fill. You can use 10W-30 motor oil or 75W-90 gear lube.

Some prefer synthetic some don't your choice.

Once you have drained the fluid start looking for shavings and pay attention to the color they will tell you what types of parts are wearing.

Jeepwrangler1993 11-30-2013 01:16 PM

Thanx I will look in to dat wen I drain it. I can hear the sound wen Itz in neutral Itz not that loud put u can hear the clicking.

jokerchief462 11-30-2013 01:58 PM

Could it be the throwout bearing in the clutch???

Jeepwrangler1993 11-30-2013 03:00 PM

I hve no Idea hope Itz something simple

tylerf83 12-01-2013 12:03 AM

check your u joints they make a clicking noise when they wear out do to the slopping back and forth during rotation just rotate shafts or shake shafts if they are not tight replace and see if that fixes your problem

Nubby55 12-01-2013 07:48 PM

Quote:

Originally Posted by tylerf83 (Post 6486962)
check your u joints they make a clicking noise when they wear out do to the slopping back and forth during rotation just rotate shafts or shake shafts if they are not tight replace and see if that fixes your problem


x2


All times are GMT -5. The time now is 09:43 PM.