I ran into a problem shortly after I bought this 90 Jeep Wrangler back in Feb. It has the 4 cyl and the ax-5 transmission. In April I lost 5th gear while driving down the highway, I have just used 4th since then and started researching what could be wrong. I figured it was the c-clip on the shaft that holds the 5th gear in place. Finally I got some time and started tearing it down last night and found out the c-clip was still there and 5th gear was still in place. What could the problem be? No 5th gear an no broken clip.:banghead:
01-21-2010 12:26 AM
i have the same exact problem on my 95. i would really like to know what going on.
01-21-2010 08:12 AM
could it be the shift for not letting it go in
01-26-2010 11:04 PM
I have the same problem with my 1995 YJ. No 5th gear and when I press the clutch in it makes a squealing sound. I put it in the shop today for them to look at. They are currently thinking it is the slave cylinder. But they haven't puled it apart yet.
01-29-2010 02:24 PM
doesnt make scence then it would be all the gears and even more of a problem in 1st, i say ya just swap it over to a ax15. and it sound like you lost a sincro.
01-29-2010 06:40 PM
What is needed to convert from AX-5 to AX-15? What parts and mods?