Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   any information about installation would be great. i.e. how to power the lights and (http://www.wranglerforum.com/f282/any-information-about-installation-would-be-great-i-e-how-to-power-the-lights-and-4216.html)

jjock 12-01-2006 06:05 PM

any information about installation would be great. i.e. how to power the lights and
 
iv never installed my own offroad lights before, but i am going to try.

does anyone know a website or guide for a beginner like me can look at to help?

any information about installation would be great. i.e. how to power the lights and how to install a trigger switch or other ways to turn them on and off.


P.S. whats the difference between fog and driving lights?

Scoob 12-01-2006 06:15 PM

Stu has some pretty good info on his site.

http://www.stu-offroad.com/electrica...5/lights-1.htm

Check out the whole electrical section, there is lots of good stuff there.

Triple88a 12-01-2006 09:32 PM

Where do you guys recomend putting the wires for the lights through? just make a hole in the roof?

MR.CLIFFORD 12-01-2006 09:45 PM

what roof??

Triple88a 12-01-2006 10:38 PM

Quote:

Originally Posted by MR.CLIFFORD (Post 34360)
what roof??

i specifically have a hardtop but also for softtop it will be nice to know.. From the lightbar kits out there all i see is that the kit connects to the bottom of the winshield and leads to the top by the metal bars.. http://4wd1.com/LIGHTBAR%20416.jpg

Scout 12-01-2006 10:40 PM

Quote:

Originally Posted by MR.CLIFFORD (Post 34360)
what roof??



he he he...dat's funny. :D

whiteyj 12-01-2006 11:24 PM

Quote:

Originally Posted by MR.CLIFFORD (Post 34360)
what roof??

You mean there's a roof option?

whiteyj 12-01-2006 11:25 PM

Quote:

Originally Posted by Triple88a (Post 34392)
i specifically have a hardtop but also for softtop it will be nice to know.. From the lightbar kits out there all i see is that the kit connects to the bottom of the winshield and leads to the top by the metal bars.. http://4wd1.com/LIGHTBAR%20416.jpg

That's what wire loom and 3M33 tape are for.

MR.CLIFFORD 12-01-2006 11:34 PM

drilling a hole in a hard top is not an option to me. It will leak. Only a matter of time. I don't think you need lights up there personally but if you do want them get the light bar. That's what they are designed for :)


All times are GMT -5. The time now is 05:36 PM.