Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Can not get MIL/check engine light to work (http://www.wranglerforum.com/f218/can-not-get-mil-check-engine-light-to-work-42256.html)

stevek 01-04-2010 12:15 PM

Can not get MIL/check engine light to work
 
Just bought a used YJ. Its in great shape and runs great. But, I can not get the check engine light to work. Wouldn't really be a big deal but I need it to pass smog here in California. I have replaced the bulb and that has not worked. Any other recommendations?

Also, the 12 volt socket is not working either. Is there any easy repair for that?

NAVYCHIEF 01-04-2010 12:30 PM

what 12 volt socket are you refering to?

stevek 01-04-2010 01:01 PM

The lighter outlet next to the ashtray. Am I suppose to get power from that?

NAVYCHIEF 01-04-2010 01:20 PM

it is the same source as the radio. if it was wired different it may only come on with the key in acc position. does the radio work?

stevek 01-04-2010 02:11 PM

I got a gps as a gift and was trying to use the charger on it and it would not work. The radio works though. Do you have any advice on that check engine light? Could it be the engine computer?

NAVYCHIEF 01-05-2010 12:12 AM

the computer gets signals from various sensors. to get the MIL to come on 12 volts must come out of cavity 32(pin 32) and into pin 9 of the inst cluster.

stevek 01-05-2010 05:50 PM

Do you think it could be a blown fuse?

GampMX 01-05-2010 05:54 PM

check 'em

stevek 01-05-2010 06:00 PM

Is the fuse for the mil indicator in the fuse box or is in line?

GampMX 01-05-2010 06:37 PM

Couldn't find it in HAYNES, but the steering column switch is inline and everything after that is fused. I would go with fuse.

NAVYCHIEF 01-05-2010 06:47 PM

Are any other lights not working or testing? Check fuse 9 on the fuse block.it powers mil,up shift and abs lights.


All times are GMT -5. The time now is 03:54 AM.