Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Daystar Rocker Switch fits in stock TJ switch location (http://www.wranglerforum.com/f282/daystar-rocker-switch-fits-in-stock-tj-switch-location-42839.html)

ryanhewitt 01-16-2010 10:37 AM

Daystar Rocker Switch fits in stock TJ switch location
 
My TJ came a soft top, and therefore has blanks for where the switches are for the hardtop wiper, defroster, etc. I wanted to find a good looking switch that I could use for my aux. lights. I looked at the Daystar Rocker Switch KU80012, and it states that it fits Daystar panels and some OE dashes. The sales person said he's seen them installed in TJ factory locations. Sure enough it fit. The universal design is very well thought out. The back of the switch has a barbed ramp for a lack of better terms so as you push the switch in, it tightens up. The barbed ramps will start to flatten out if you've reached the switch hole size, but haven't bottomed the switch flush against the bezel. What a great idea for a universal fit! The are rated to 20 amps, have 3 poles, are lit when on, come in four colors, limited lifetime warranty, and made in the USA! The only minor issue may be removing the switch. One may have to cut the barbs from the backside with a Dremal, or similar. If this is old news, please disregard.

Bobthegod 01-16-2010 11:13 AM

Check these out!!!1

OTRATTW


All times are GMT -5. The time now is 10:33 AM.