Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   How does this even happen? (http://www.wranglerforum.com/f290/how-does-this-even-happen-42850.html)

carlyj 01-16-2010 12:51 PM

How does this even happen?
 
I took my MC2100 off and as I was wrenching some other stuff, I take a look at the MC2100 and find that one of the arms off of the base of the carb has completely rotted off.

How does this even happen?

http://carlthree.net/images/Jeep/Jad...00115-2348.jpg

http://carlthree.net/images/Jeep/Jad...00115-2348.jpg

http://carlthree.net/images/Jeep/Jad...00115-2348.jpg

uplifted 01-16-2010 01:14 PM

Tighening it down to much would cause that.... most likely was cracked a long time ago and slowly the aluminum oxidized and work it's way through the crack..... The thicker and softer the base gasket, the easier it is to crack it if tightened to much.. always tighen in a criss cross pattern and evenly....


All times are GMT -5. The time now is 03:17 PM.