So, dumb question, i can't get my rear seat to actually lock in place, i pulled some kind of lever type thing on the left side if you're coming in from the tailgate, and the whole seat is not connected to the tub now, so when i have passengers back there and go over a speed bump, they go up, and so does the seat!
Any one wanna help me out on how to get it back in.
01-31-2010 01:09 PM
that lever is the lock. there is a pice on the wheel well it hooks into. fold your seat all the way forward and take a good look at it. maybe it's bent,buckled or distorted.
01-31-2010 01:16 PM
Is the front attached to the pins on the tub
01-31-2010 05:46 PM
okay, so i see the pins and on the bottom of my seat there's holes that they're supposed to go into i guess, i can't get the drivers side one to go in the hole, the passenger will but not sure what to do, i don't want to have people riding in the back anylonger if the seat isn't connected
01-31-2010 07:13 PM
When I fold my seat forward and then return it. The lever tends to go under the pin instead of over it. First few times I had people back there, it did the same thing. Then I realized I had to hold the lever up, while placing the seat down so it would lock in place like it should.