Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Door gasket issue for 97 Wrangler (http://www.wranglerforum.com/f210/door-gasket-issue-for-97-wrangler-44271.html)

betdee 02-10-2010 02:11 PM

Door gasket issue for 97 Wrangler
 
Hey all, I just bought this 97 Wrangler and have been having trouble finding a drivers side door gasket for it. Since this one was made 11-97, they had used the sliding gasket, not the gromet gasket. I went to a 4wd store in Nashville, TN and they said they don't make them. Can anyone tell me where to find one, and if not, what can I do to get a gasket on this door?

Thanks!

bigskydrift 02-10-2010 02:24 PM

I also bought a 97 TJ last summer and had to replace the door seals, (full doors) got them from Quadratech!
Original Replacement Parts / D3012 - Dirvers Side Full Steel Door Seal for 97-06 Jeep® Wrangler TJ & Unlimited - Quadratec

Original Replacement Parts / D3013 - Passenger Side Full Steel Door Seal for 97-06 Jeep® Wrangler TJ & Unlimited - Quadratec

betdee 02-10-2010 09:10 PM

Door Seal
 
That looks to have the gromets on it. We have to have the slider type for a half door. Thanks anyway.

crispymach 02-10-2010 10:38 PM

Does the gasket look like a U? I had a set on my YJ that I replaced it. If its the gasket the sliding windows ride in the gasket I will look and see if I can find where I got it. In 14 years I have a notebook for every rig I have ever owned with a list or parts and where I got them. I will look tomorrow morning and let you know.

betdee 02-11-2010 04:14 PM

Door gasket
 
Thank you

slf41002 02-11-2010 05:08 PM

JEEP PARTS 1997-2006 WRANGLER TJ 1/2 DOOR TO BODY SEALS : eBay Motors (item 120343659662 end time Feb-25-10 05:37:32 PST)

slf41002 02-11-2010 05:11 PM

huh I just looked a little closer to the pic for the ad I just put up and it also has the clips and not just the slide in the grove type.

slf41002 02-11-2010 05:23 PM

sorry i have searched the net and found pretty much zip.....

betdee 02-11-2010 06:50 PM

Door Gasket
 
Thanks for all your research. I've been unlucky as well. Does anyone know if the gromet holes are under that slider piece to where we could take it off and use the 97 gasket with gromets? A guy at the parts store said he would take it off and drill out for the gromets.... but that just seemed a little much to me.

ind84 01-02-2013 06:22 PM

Quote:

Originally Posted by betdee (Post 544066)
Thanks for all your research. I've been unlucky as well. Does anyone know if the gromet holes are under that slider piece to where we could take it off and use the 97 gasket with gromets? A guy at the parts store said he would take it off and drill out for the gromets.... but that just seemed a little much to me.


....so what did you end up doing?


All times are GMT -5. The time now is 10:18 PM.