Iím brand new to the forum and Iím looking for some help. I just bought some stainless steel door hinges to replace my stock ones. However, Iím having a really hard time taking my torx screws out. I already stripped out one of the bolts so Iím afraid to keep going. Has anyone ever replaced their door hinges or have any advice on how I can easily take out the torx bolts holding the hinges? Any advice is appreciated. Thanks!
03-05-2010 01:40 PM
Spray some WD40 on the screws, let it sit then unscrew
03-10-2010 01:03 AM
If you have to go out and buy WD40, I'd instead recommend PB Blaster. Hell, I've used Carb Cleaner and Belt Conditioner before with great results! Just go slow, take your time, and don't even think of using a drill.