i am trying to install a BEM cluster backing. it has a power wire and a ground. I need to know which wire on the headlight switch i should splice into, so that was when i turn my lights on, the cluster glows.
03-18-2010 06:51 PM
Do you have a FSM? If not, a guy on this forum, Atthehop, can help you get one for your year Jeep.
03-18-2010 08:25 PM
i have one, but electronics is def not my thing. i figured someone on the site would know a thing or two about that particulate harness
03-18-2010 09:48 PM
well, i hVE THE HANES MANUAL. NOT THE fsm.
03-19-2010 01:42 AM
check your pm's
03-19-2010 01:59 AM
ok, so this is what i did. found in the manual a wire (E2 20 OR) which is an orange 20gauge wire, it hooks up to everything that lights up in the cockpit when u kick your headlamps on(radio, cluster, heating and a/c.....). so i just spliced the power wire (red) from the cluster facing into the orange wire that hooks up to aux switch locations near the cigarette lighter and hooked the ground to the ground wire that was part of the same attachment. i just cut the male end of the plug off and wired them together. easy as that. i think it looks pretty damn sic.