Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Communications and Electronics (http://www.wranglerforum.com/f40/)
-   -   Installing Factory Subwoofer (http://www.wranglerforum.com/f40/installing-factory-subwoofer-48283.html)

JeepApex 04-06-2010 06:32 PM

Installing Factory Subwoofer
 
Last week I bought a 2010 Jeep Wrangler Sport with the 6 speaker Infinity system. I know this goes against the grain of a lot of "sound advice" but I want to install the factory sub which is an option for the Sahara and Rubicon models.

I found the sub pretty cheap and am willing to purchase it, however I want to make sure it would be able to be installed in my Jeep. Anyone have any information on this as to whether it can be done or not? With my 02 TJ it was a simple plug and play. Can I expect the same with the 2010 JK?

I'm only interested in getting the factory subwoofer. I realize there are better/more powerful subs out there but I don't want to blast around the streets... call me old fashioned.... ;)

Thanks in advance for any help.

jk'n 04-06-2010 10:54 PM

I suppose you could look under the carpet on the passenger side at the top of the tub for the connector. If it is there, put an AC meter on it and turn up the tunes to see if there is any output.

plac 04-07-2010 09:09 AM

ya, as long as you have a harness there, it should be a bolt in affair. right rear corner of trunk.

canadianwizard 05-04-2010 07:22 PM

Make sure that the amp will come with the sub if the amp is not in the jeep...

plac 05-04-2010 08:27 PM

Quote:

Originally Posted by canadianwizard (Post 616299)
Make sure that the amp will come with the sub if the amp is not in the jeep...

ORLY... where is the amp located?

thelarster 06-15-2011 10:06 AM

Was there resolution to this? I just got a 2007 Umlimited X and no sub so I was thinking the same thing!


All times are GMT -5. The time now is 09:43 PM.