Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   How to remove an old Console? (

Arkansasdawg 12-30-2006 09:12 AM

How to remove an old Console?
1 Attachment(s)
Just bought a 99 Wrangler and it has an old Console mounted. The lock doesn't work and it is not mounted securely. It seems to be mounted to the floor from the rear of the console but I have been unable to find any way to get under the console or inside to locate mounting hardware. How do I get this thing out so that I can replace it??? I have included a pic


MR.CLIFFORD 12-30-2006 10:51 AM

hack the top off. Get under your jeep and look at the tunnel. You should see some bolts under there somewhere. You can drill the bolt heads or grind off the nuts. I would cut a hole in the side to get at some bolts if you need to turn from the inside.

Arkansasdawg 12-30-2006 01:08 PM

Thanks, I was afraid that there was not a "Magic," easy way to get it off. Wish me luck as I tear into it.

amerijeep 12-30-2006 03:15 PM

Take a pic of the actual lock for me and I'll probably have atip for you. I break into stuff for a living.

Arkansasdawg 12-30-2006 03:26 PM

I can get in but it just will not catch. Anyway the whole console "wobbles" and is cheap looking. I am ready to replace it anyway

amerijeep 12-30-2006 04:33 PM

Oh ok, sorry.

tiny terror 12-30-2006 04:45 PM

Too late, cat's out of the bag 'merijeep.

All times are GMT -5. The time now is 03:39 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.