Hey hows it going,
This weekend i installed my BB BL and MM's. And i just have a few questions about vibrations.
When hit 50 I think i feel slight slight vibs. But once i get over that its fine and under it is fine.
When you guys say you get vibs how much can you actually feel them? Does it rumble the whole jeep a lot? I can feel it the brake slightly to....is the normal?
I was just wodneirng what i should be looking out for. i dont want to break any seals or anything like that
vibrations can be anything from barely noticeable to what is lovingly referred to as "Death Wobble". it doesn't sound like your vibs are that bad, so i'd start with a good balance and rotating of your tires. if that doesn't fix them, then either get an alignment or do it yourself(Click me).
but getting them from a BB, BL, and MML are pretty common.
Also, I would double check all your front-end components and all bolts to make sure they are all tight...ie: tie rod, drag link, etc
sometimes a BL and MML may not solve all vibes so if it is driveline vibes then you will have to cure it with a tcase drop or sye and cv driveshaft...but check the other things first like khenderson said before you start doing the other things.
eventually i want to run a cv and sye but heres my question.....i'm thinking into the future.......
Right now I have the BB and will problay keep that for while but eventually I am probaly going to want to upgrade to like a 3.5 or 4 inch lift.
If I get the sye and cv now will it still be good for when I go for more lift? Or would i have to get a different size? And whats this i hear about adjustible control arms in the rear for the cv?
My last question is does the cv and sye guarentee no vibs?
thanks for the help
|All times are GMT -5. The time now is 09:52 PM.|