anyone here have the exploded diagram of the ignition tumbler/ignition pin/ignition switch
i need to know were a couple small parts go (little rod and a spring that came with the pin)
also any advice on getting a jammed ignition.....ive tried all the non destructive tips...this bad boys jammed gooooooooodddd
ive drilled most of it out to the point where only a piece of the old tumbler remains....the ignition pins broke to so im guessing its jamming the tumbler from turning to the on position so i can get it out
i have a brand new tumbler/ignition pin/ignition switch waiting in my room
for two years ive turned my jeep on with the key in the jammed ignition (sentry key) and a screwdriver turning the ignition switch...and now im fed up with it and decided to fix it
04-16-2010 08:44 AM
What year are you looking for.
04-16-2010 09:44 AM
it would be a 2000
04-16-2010 10:01 AM
I looked in my 04 FSM and Parts Fiche and they have a little but not much.
04-16-2010 10:12 AM
you think if i call a dealership they would print me out a copy of the diagram they have, i no they have one cuz when i went to pick u the tumbler i took a sneak peek at there computer screen and saw it...
wouldn't life be so much easier if we could get the resources they have
04-16-2010 10:50 AM
Wouldn't hurt to ask.
04-16-2010 06:07 PM
well the dealer is no use...they dont even have one diagram that shows that part of the car....im sure some of the veterans of this forum have replaced the ignition pin in a tj....
04-16-2010 06:15 PM
PM me and I will send you a link to download the parts fiche for your year. It's what the parts people ust to look up parts before computers.