Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   front axle u-joint help ? (http://www.wranglerforum.com/f210/front-axle-u-joint-help-48946.html)

yburn 04-16-2010 07:43 AM

front axle u-joint help ?
 
Ok was changeing frotn u-joint,this thang was froze in there so after along time of trying to beat it out I took it to the local parts shop to have them press it out was there for 3 hrs it took them hour and a half to get it out!!!And the cracked my out side shaft putting it back in:mad:,Where can i find just the outer stub shaft for the driver side front axle ???:banghead:

T-BONE N BIXBY 04-16-2010 08:33 AM

Call a local driveline shop.

snwchris 04-16-2010 10:42 AM

Check ebay, or buy one from Northridge 4x4 or 4x4Rockshop. Any of the online places should carry them.

Did you and them remeber to remove the clips on the u-joints... I had a friend that forgot this little step since they were all dirty and endup up bending the ears when using the Ball Joint press.

jdhallissey 04-16-2010 10:55 AM

Run to the junkyard and find a dana 30 in a jeep and pull it. Never bad ot have extra shafts laying around either.

yburn 04-16-2010 11:47 AM

So the dana 30 end shaft is the same on the 44 ?

yburn 04-16-2010 11:47 AM

ya i had the clips off just grew together i guess ???

Jerry Bransford 04-16-2010 12:38 PM

Quote:

Originally Posted by yburn (Post 600122)
So the dana 30 end shaft is the same on the 44 ?

The part you're looking for is commonly called the outer stub shaft and the TJ Dana 30's is the same as what is on the Rubicon's front Dana 44. :)

yburn 04-16-2010 01:58 PM

ok thanks guys!!


All times are GMT -5. The time now is 07:26 PM.