Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   new headers help (

black tj 97 01-04-2007 01:15 PM

new headers help
MY names kyle im new to the site im taking my old cracked hearders off soon and im looking for some help at what i may need to look out for.

whitebuffalo 01-04-2007 01:23 PM

spray the bolts down every day for a week prior with some PB blaster. it'll help keep from sanpping one of em off.....

black tj 97 01-04-2007 01:28 PM

Thanks hopfuly that should do the trick.

khenderson 01-04-2007 02:20 PM

also, probably most write-ups you'll find on the subject...or a haynes manual, might tell you to take off the intake manifold, fuel lines, etc. none of that is necessary. once you get all the bolts off, you can just move the intake and everything to the side enough to get the exhaust manifold out.

whitebuffalo 01-04-2007 03:34 PM

when i replaced mine on my 4 banger, the replacement manifold skirts were too thick to clear the intake manifold (where it lays over it.) i had to grind them down some. it was a PITA, mainly b/c i ttook me forever to figure out WTF the problem was......

black tj 97 01-04-2007 04:44 PM

thanks for all your help ill let you know how it goes

All times are GMT -5. The time now is 10:56 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.