everything has been going pretty smooth up until step #35. i found this plug and cut back the tape and there are 2 blue/white wires going into the connecter. i'd really like to figure this one out before i did anything else.
sorry everybody it was my mistake, there was a grey/white and a blue/white and i was seeing red. got it all wired up and realized i should has payed more attention to step one. the plug isn't the right one for my hardtop and i should have pulled the wires past the middle roll bar first.
05-23-2010 07:33 PM
Originally Posted by MUDDUMP
are ya'll serious?! nobody has done this before?
Yes we have done this before but:
- You did not indcate what model year Jeep. The underdash wiring changes.
- You did not indicate what kit that is. On my Mopar wiring kit for my 03, no wires needed to be cut.
05-23-2010 09:47 PM
Originally Posted by Neil F.
On my Mopar wiring kit for my 03, no wires needed to be cut.