done a spring over bout a month ago and here recently my drivetrain...mainly transmission shakes back and forth bad whenever i take off in first...ive got worn springs and axle wrap i know...will be making some anti-wrap bars...did a transfer case drop also...was lookin to get a poly transmission mount to swap put the rubber and seen somethin bout a center pin or something...wheres this located maybe mine has come out...got a 91 w/ 4.0L and 5spd
06-16-2010 12:23 PM
no center pin in trans mount, center pins are on the springs.
06-16-2010 02:59 PM
i know that..i guess maybe its called a stud...i dunno...was lookin for tranny/tcase mount and keep seeing a kit that has motor mounts, tranny/tcase mount and a stud lookin thing....i dunno
06-16-2010 03:20 PM
been a couple years since I changed mine. from what I remember, theres 2 bolts to the tranny and two bolts through the skid plate. I like the poly, and I think GM uses the same one. so easy to find at parts store.