Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Wrangler Sahara engine wiring problem. (http://www.wranglerforum.com/f218/wrangler-sahara-engine-wiring-problem-53485.html)

MikeyD 06-21-2010 04:35 AM

Wrangler Sahara engine wiring problem.
 
Hi guys, new here so please be patient and apologies as this is bound to have been posted to the wrong section - thanks in advance if you move it moderator!

Ok, I have a 1995 Wrangler Sahara and I have just removed the manifold etc to get the exhaust welded/repaired. After putting it back together it will not start.

On inpection I have found a wire that looks to have been sheered off. It is at the far end of the manifold and has three wires in one and looks much like a 3 wire version of a speaker wire. It seems to match exactly to a wire that comes out of the middle of the coil on the other side of the engine. I assumed it had come away from within one of the large wire bundles and have stripped the covers off them to no avail - I simply can't find where these wires were connected to and wondered if anyone can help me please?

Thanks.

MikeyD 06-21-2010 08:05 AM

Not to worry - problem solved! I found where they came off - the sensor between the engine and gearbox.


All times are GMT -5. The time now is 06:35 PM.