Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   For those with the Currie Antirock... (

Ray - San Jose 06-24-2010 04:09 PM

For those with the Currie Antirock...
How far away from the frame is the outside of the arms? My factory sway bar sticks out about 2.5" at it's farthest point from the frame. From the pics I've seen, the Currie looks a lot closer to the frame, but I can't tell how close.

Of course the measurements from a TJ would be prefered :D

Ray - San Jose 06-26-2010 12:17 AM

No one?

Even emailed Currie, still no response.

FguyTJ 06-26-2010 10:23 AM

3/4" for the majority of it till the frame heads inward towards the engine, and its 1-1/2" at the end of the arm.

Ray - San Jose 06-26-2010 12:20 PM

Sweet, thanks for the numbers. Now to pull my sway bar and see if I have the room for a Currie.

Jerry Bransford 06-26-2010 12:41 PM

Why would you not have room for an Antirock?

Ray - San Jose 06-26-2010 01:30 PM

I just pulled my sway bar, and I'M just barely off the frame at full articulation. So no room for a Currie either. I took a pic, but my phone decided not to save it. Apparently the info I'd gotten was wrong. You can't run disconnected with 33 10.5x15 on stock wheels (2.5 OME and 1.25 JKS). Unless of course you're brave enough to run without a sway bar. Guess I'll just leave it connected for now, and possibly change out the wheels at a later date :( I'm not brave enough to run without some form of sway control.

Ray - San Jose 06-26-2010 02:23 PM

For clarity, I moved the response to the parent thread about rubbing the sway bar.


All times are GMT -5. The time now is 02:50 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.