Aussie Lockers.....PROS vs CONS...ease of install?
I just purchase a pair of Aussie Lockers for my 2001 TJ. Dana 30 for the front and Dana 35 for the rear.
Should have em in a couple weeks.
I am just curious if anyone has any thoughts????
Good or Bad.
I just installed one in the front and the hardest part was getting the carrier to stay in the vise good(small vise):D . Also what worked best for me in getting the carrier out of the housing was using two pry bars on a upper and lower ring gear bolt, heres a picture of what Im talking about: http://www.stu-offroad.com/axle/d30seals/seal-5.jpg . and put something soft under it or have someone ready to catch it just in case it falls out fast when you do that.
Here is a couple write-ups that I bookmarked:
and a fluid capacity chart:
I printed out the one from 4x4xplor when i did mine.
Also I can here the clicking sometimes when I turn slowly which isn't that bad but "they" say it goes away after a while. I'm testing it out tonight so I'll tell you how it does offroad.
hope that helps some... http://www.wranglerforum.com/images/icons/icon14.gif
there are multiple aussie lockers in my club. all the owners say they wont wheel with anything else. i am putting them in f/r of my 97 TJ.....
|All times are GMT -5. The time now is 11:38 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.