4" lift Stock Arms
so I have pieced together a 4" lift
with pro comp coils
dt shocks, re hd front trac bar and what not..
now i dont do any serious rock climbing or nething of the such
we dont have any of that around here but we do have some trails
I was just wondering if anyone else road around like this for a while
i went otu and hit some strip mining pits the other nite and the jeep flexed real well lots of drop which is just awesome :D
ne info would be kewl
For the short term you should be okay. Any vibs? How do the driveshafts look in relation to the diffs? Stock arms flex really well, but part of that is because the arms are thin and under load the metal will flex. I got to see two of them bend this past weekend.. was not good. Thus as soon as you can get some better after market ones in there.
you may find some binding with the stock arms on full droop. How do you find the ride? When I ran stock arms with a 3.5 lift I found it extra bouncy.
the jeep doesn't ride any differently than stock
other than with the MT's around 35-40 I get just lil steering wheel vibe
and when i go over a bridge or what not and that lil lip between bridge and road when I hit that it is like a Tank..
but no vibes or anything like that
I went out back of town and did some flexing and no binding or any type of noises as I drove up some banks to get flexed...the tire that was drooping actually looked like it was doing just fine
|All times are GMT -5. The time now is 02:27 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.