Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   quick killswitch question (

LilBlueTank 08-04-2010 05:18 PM

quick killswitch question
ok so i've searched the forum but can't seem to find an easy write up. which wire should i tap into? the constant 12v, the ignition, or the starter? Ill do a write up with pics when complete

LilBlueTank 08-05-2010 12:19 AM


s3nt3nc3d 08-05-2010 12:32 AM

A lot of people tap the wire that energizes the ASD relay (auto shut down relay) controls a lot of crucial things needed to start the Jeep...starter, fuel pump, etc. There's a write-up for this kill switch a search for I think it's ADE kill switch.

Here ya go:

If you're just doing your own quick doesn't really matter (some people do starter kill switch, others do fuel pump kill) as long as the switch is properly rated to handle the current going through it or you use relays to do the switching.

All times are GMT -5. The time now is 05:01 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.