Daniel Stern Wiring Harness - question on install
I have a Daniel Stern wiring harness mounted in my 2010 Wrangler. I just switched out the stock headlamps with Cibie headlamps. The wiring harness and relays seem to be mounted properly, and I believe I've connected the new headlamps properly.
However, the Cibie headlamps are only activated on the high beam setting. They don't come on at all when I keep the beams on the low setting. Any idea what I'm doing wrong?
Thanks in advance.
|All times are GMT -5. The time now is 06:14 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.