Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   1991 Wrangler Glove box (http://www.wranglerforum.com/f290/1991-wrangler-glove-box-57360.html)

45 ACP 08-06-2010 01:07 PM

1991 Wrangler Glove box
 
Does anyone know how to remove the glove box from a 1991 Wrangler. It looks like I have all the screws and bolts out but, somthing is still holding it in place. Help!

mike_b_ar 08-06-2010 10:06 PM

There are 4 bolts holding it in from behind. You'll have to pull back the metal dash (which means you have to remove the dash pad) in order to access them.

FNjeep 08-06-2010 10:24 PM

Sorry 45 ACP, that thing is a pain in the rear, just like mike_b_ar is trying to delicately point out.

yjeric 08-07-2010 11:19 PM

just pulled my glove box on my 90 today. It had me stumped for a little intill i reached up behind it and felt the screws (two on each side) holding it. Used a stubby phillips and was able to remove them. You can't remove the dash pad before removeing the glove box because there's a couple of dash pads screws behind the glove box

45 ACP 08-08-2010 04:04 PM

Glove Box
 
Thanks all. I did see the screws finaly after running my hand behind the glove box. I am changing the color of my interior and thought it would be neater if I removed the glove box to paint.

I decided to leave it in place and tape up every thing and paint it and the dash board. This was my project for Saturday. I painted everything black and it came out very nice. No more ulgy tan interior. I used Krylon spray paint for plastic. Very nice paint for this application.

I think that I will paint my fender flares with it next Saturday.

Thanks again to all.


All times are GMT -5. The time now is 06:37 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.