Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   ODB codes not found on any list (

JBCoker 08-11-2010 05:36 AM

ODB codes not found on any list
My '06 Golden Eagle is giving me multiple codes when I do the key trick. Some I have found on the lists in this forum and others, some I can't find. The ones I can't find are: 32, 38, & 58. Anybody have a clue what these codes are? Any help would be greatly appreciated.


Sticks 08-11-2010 09:38 AM

Never heard of a 2 digit code on an OBDII compliant vehicle.

I have found everything from air bag issues, transmission solenoids, to O2 sensors. I am leaning towards that as P0032, P0038, and P0058.

JBCoker 08-11-2010 09:44 AM

My mistake, the codes are preceded by zeros. Thanks for the info.

Brad[LK1] 08-11-2010 09:44 AM

Those are Jeep Hex Codes not OBDII codes....gimme a bit and let me see what I can find

JBCoker 08-11-2010 09:49 AM

Hex codes?
Ok, I'll research a little myself.


baja 08-11-2010 11:34 AM

Sure there isn't a 1 before each set of numbers?My book says P0132-138-158 are all O2 sensor related.

JBCoker 08-11-2010 11:51 AM

I am sure they are not preceded by a 1. They look exactly like this "P0032/P0038/P0052/P0058". I was able to find them at Check Engine Light Codes [OBD-II DTC] They all say Heater Control Circut High. Is this bad? I am in Kuwait and the outside temp runs 115+. I also get a P0113 Intake Air Temperature Circuit High Input. Because I'm in Kuwait there are no emissions laws to speak of, is it safe to just disconnect the O2 sensors? I have read that a couple people on Jeep forums have done this. Thanks for any help.

All times are GMT -5. The time now is 07:21 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.