I just looked up my shock part numbers and found that the front shocks are from Rancho and are made for 2-1/2" lift, the rear shocks are apparently from Rough Country and are for 4" lift. Does this seem jacked up to have shocks on the back for 4" lift and only 2-1/2" lift rated shocks up front, will it cause problems? If its wrong do I just match the back shocks to the front or am I supposed to match the front to the rear? Im new to lifts and my jeep came with the lift so Im trying to make sure everything works together.
08-11-2010 02:34 PM
If it helps, the front shocks are a Ranch 5255 shock. The rear are supposedly a Rough Country 8177-9177 shock.