Just purchased a 14' Sahara. Want to put Mickey Thompson wheel/tire combo on her. My concern is the Tire Pressure sensors. Can sensors be added to any wheel I choose or are only certain wheels capable? Thank you in advance for any help.
03-26-2014 01:10 AM
should be able to be added to any wheel they attach to the valve stem if im not mistaken. You can have a tire shop swap them over from your current wheels... or have new ones installed when you buy your new wheel and tire combo.
When i bought mine i just ordered them with my combo from discount tire, they installed them and were ready to rock and roll.
03-26-2014 01:15 AM
Hopefully that is the case... planning on calling a local tire shop tomorrow to confirm.
03-26-2014 02:24 AM
I know plenty have swapped them before. You should be good to go!!!
03-26-2014 06:14 AM
Some aftermarket wheels will not accept sensors. Procal is the only answer.
03-26-2014 10:30 AM
The Supchips FlashCal will also allow you to change and even turn off the TPMS. Depending on what tires size you're going with, you may be running a much lower pressure than the system likes. So even if you get the sensors switched over to the new wheels/tires, you may get the light. The Flashcal lets you change the settings to get around that.
Let me know if you have any questions or would like a quote!
03-26-2014 10:54 AM
Looking at getting Mickey Thompson 32x10.5R16 possibly 15's. I like the Mickey Thompson Wheels as well but would look at others that might accept the tire pressure system. I want a wheel/tire combo that with fit with no lift.