Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Rokmen - CJ's TJ, HiLines, 35's on 2.5" lift (http://www.wranglerforum.com/f282/rokmen-cjs-tj-hilines-35s-on-2-5-lift-61271.html)

dave@rokmen 09-10-2010 11:16 AM

Rokmen - CJ's TJ, HiLines, 35's on 2.5" lift
 
Another nice Rokmen HiLine install on a TJ Rubicon. This is a good example of 35's on 2.5" of Suspension Lift with Hilines. It's ready for 37's next spring.

We've been working on CJ's jeep off and on for a couple years now. CJ was never very happy with the aftermarket parts that were on it when he purchased it. We've been slowly working on dialing it in since the begining. This round we installed the Rokmen HiLine fenders, Hood Pins, LED Marker Lights and lowered the jeep by swapping out the suspension to an OME setup.

http://farm5.static.flickr.com/4073/...e9c08f28a8.jpg

http://farm5.static.flickr.com/4087/...dd3de299b2.jpg

http://farm5.static.flickr.com/4091/...1586a273e2.jpg

http://farm5.static.flickr.com/4111/...0b29b7b705.jpg



There are many more pictures in our gallery here:
CJ's TJ - a set on Flickr

flint 09-10-2010 01:45 PM

Dave,

Do you guys sell the turn signal lights on your web page or did you get them from somewhere else.

Very nice build!

Ageless Stranger 09-10-2010 01:51 PM

Very nice work, as usual, Dave. One question, do you normally have to cut the hood off to install Hyline fenders. Seems obvious that you do, but I don't remember ever seeing on done like that before the red one you've been posting about.

dave@rokmen 09-10-2010 07:09 PM

For HiLines, yes you do.. That's where the clearance comes from - We've done it on all our Hilines since 2006. BUT - you could go with a new Hood From AEV that is a HiLine hood, we've done this several times too.

dave@rokmen 09-10-2010 07:11 PM

We do sell the lights as a full kit - they just haven't made it to the web page yet.

Give Sean a call on Monday and tell him what you need.

AzTJ 09-10-2010 07:33 PM

Looks good Dave. :punk:

Quote:

Originally Posted by Ageless Stranger (Post 766313)
Very nice work, as usual, Dave. One question, do you normally have to cut the hood off to install Hyline fenders. Seems obvious that you do, but I don't remember ever seeing on done like that before the red one you've been posting about.

Or you can shell out the cash for an AEV hood. :zap:

jskinn27 09-10-2010 08:05 PM

looks awesome! one day, youll be doin work for me! i hope hahaha

distortedtj 09-10-2010 08:07 PM

Dave...what arms are you running on it? Mid arm like your other builds or stock with adjustable? and steering???

dave@rokmen 09-11-2010 10:09 AM

They are our control arms of course... ;)

Geoff@Bestop 09-11-2010 12:28 PM

"CJ's TJ" is a very confusing title.

But that's a sweet build.

distortedtj 09-11-2010 02:16 PM

Quote:

Originally Posted by dave@rokmen (Post 767659)
They are our control arms of course... ;)

Your custom mid arms or standard short arms? If short, how do you expect them to operate with 37's? any issues?

warlock4890 09-11-2010 05:33 PM

Dave, when you cut the hood for your hilines, what do you put on the bare metal edge? Do you apply any paint or sealant before you put on the door trim material?


All times are GMT -5. The time now is 01:40 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.