Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Looking at new front bumper (http://www.wranglerforum.com/f274/looking-at-new-front-bumper-61878.html)

Sask. Jeep 09-15-2010 08:51 PM

Looking at new front bumper
 
Im looking at replaceing the front bumper on my 2010 2door JK with the following bumper made by Rock-Slide Eng. Rock-Slide Engineering FBF-100-JK - Rock-Slide Engineering Ridge Series Front Bumper in Textured Black for 07-10 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec
Has anybody had any experience with them as a manufacturer and how is Quadratec like to deal with?

daggo66 09-15-2010 08:58 PM

I've never had an issue with Quadratec, but I usually find better prices at 4Wheel Parts.

Steel02001 09-15-2010 10:13 PM

A lot of people have reported getting used parts from quadratec.

Sask. Jeep 09-16-2010 08:18 AM

Thanks I'll check out 4Wheel parts.

osu50sprinter 09-16-2010 08:40 AM

looks cool, but really expensive to me

clear lake jeepn 09-16-2010 09:08 AM

Take a look at Metalcloak....they make some sweeeeet bumpers!

jayc 09-16-2010 09:31 AM

:eek:OMG!!! Thats a serious bumper!!!!! A few people on here have been complaining about quadratech with the used parts but if you have a 4wd parts store near you they price match and then you get free shipping bc they get it shipped to the store, cant beat that. good luck, your Jeeps going to look mean

yomondo 09-16-2010 11:06 AM

That's a nice bumper, but have you seen this one?
Rock Hard 4X4 RH5005 - Rock Hard 4x4 Parts Full Width Front Bumper for 07-10 Jeep® Wrangler JK - Quadratec
Similar, less expensive, and IMHO looks better. When I was considering a full-width front bumper, this was my top choice.

I've never had any problems with Quadratec, but do shop around because you can often (not always though) find a better deal elsewhere.

kawasakizx636 09-16-2010 03:16 PM

Take a look at the AEV bumper if you're looking to spend that much cash.
https://secure.aev-conversions.com/s...ode=10305055AA

HansB 09-16-2010 03:25 PM

3 Attachment(s)
I've got the AEV front (with warn 9500 winch) and rear (with tire carrier) and couldn't be happier. Incredible bumpers!

oletennessean 09-20-2012 01:20 AM

Quote:

Originally Posted by Sask. Jeep (Post 774230)
Im looking at replaceing the front bumper on my 2010 2door JK with the following bumper made by Rock-Slide Eng. Rock-Slide Engineering FBF-100-JK - Rock-Slide Engineering Ridge Series Front Bumper in Textured Black for 07-10 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec
Has anybody had any experience with them as a manufacturer and how is Quadratec like to deal with?

Bringing this one back to life, did you ever get this bumper? I've been looking at it too but haven't bit the bullet

mcgee10 09-20-2012 06:08 AM

1 Attachment(s)
Looking at bumper made me nuts, I looked for weeks and looked at them all. I went with a Warn bumper for $689.00 it is very well made and I really liked the lowered winch mounting plate. And there are many mounting holes so almost any one's winch will fit.

djmars404 09-26-2014 03:42 PM

Quote:

Originally Posted by HansB (Post 775150)
I've got the AEV front (with warn 9500 winch) and rear (with tire carrier) and couldn't be happier. Incredible bumpers!

thats a sweet combo!

Godholio 09-26-2014 04:33 PM

Edit: Ok, so I'm not going to respond to a 2 year old post.

HRPinDC 09-27-2014 01:46 PM

Quote:

Originally Posted by Godholio (Post 13689665)
Edit: Ok, so I'm not going to respond to a 2 year old post.

Yeah, you did......


All times are GMT -5. The time now is 04:31 AM.